Full-view glass
Raised-panel steel
Carriage house
Modern flush
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does a Garage Door Cost in Broadview Park?
Garage door work in Broadview Park typically runs $150 – $600 for most repairs, while a full new door installation usually lands between $700 and $2,200. The single most common call we get – a broken spring – costs an estimated $180 – $340 for one spring, and because springs wear in matched pairs, replacing both together runs about twice that. Every job is quoted in writing before any work starts, and that written estimate sets the final price.
Broadview Park is a tight, mostly single-story residential pocket just west of Fort Lauderdale, where most homes have attached garages that get used as the front door. Doors here open and close dozens of times a day, and the heat and humidity we live with most of the year work on steel, springs, and opener gears in ways that show up as squeaks, slow travel, and snapped torsion springs. We’re garage door specialists, not generalists, and we work on the brands actually installed in this neighborhood: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
If your door is stuck open, hanging off its track, or making a sound that wasn’t there yesterday, call (844) 443-4021 for a free estimate. We handle emergency garage door service for failures that can’t wait, and we can usually get someone out the same day.
Key Takeaways
- Most Broadview Park garage door repairs cost an estimated $150 – $600.
- One torsion spring: $180 – $340. A matched pair costs about twice that.
- New door installation: $700 – $2,200, depending on size, material, and whether the opener needs replacing.
- Opener repair runs $120 – $320; new opener installation runs $250 – $550.
- Free estimates, upfront pricing, and same-day service on most urgent calls.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs cost in Broadview Park this year. These are typical estimated ranges for the local market, not a menu – your written estimate is the number that matters.
| Service | Typical Estimated Range | What It Covers |
|---|---|---|
| Garage Door Repair (general) | $150 – $600 | Diagnosis plus the fix – hinges, bearings, adjustment, hardware |
| Spring Repair (one spring) | $180 – $340 | One torsion or extension spring, sized to your door |
| Cable Repair | $130 – $250 | Frayed or snapped lift cable, drum and safety check |
| Opener Repair | $120 – $320 | Gear, capacitor, logic board, sensor, or remote/programming issue |
| Opener Installation | $250 – $550 | New opener, rail, mounting, and safety sensor setup |
| Panel Replacement | $250 – $500 | One damaged section, matched to your existing door profile |
| Track Realignment | $120 – $240 | Bent or knocked-out vertical and horizontal track |
| Roller Replacement | $110 – $220 | Worn rollers, usually all of them at once |
| New Door Installation | $700 – $2,200 | Full door and hardware, removal of the old door |
Those ranges move for a few reasons. A single-spring replacement sits at the low end; a matched pair costs about twice the one-spring range because both springs get replaced together and both have to be tensioned correctly. Panel replacement depends on whether we can source a section that matches your door – on a Clopay or Amarr door that’s usually straightforward, on an older Wayne Dalton or Raynor profile it can take a day or two to confirm the match. Opener work varies by brand and age: a Genie or Chamberlain unit with a failed logic board can run toward the top of the opener repair range, while a simple sensor alignment or remote reprogram sits near the bottom. Installation pricing depends on door size, material, insulation, and whether the existing opener is compatible with the new door’s weight.
What we won’t do is guess. The right fix, not the fastest guess – we diagnose the actual failure before quoting, so you’re not paying for parts that weren’t the problem. For a look at how we handle the repair side, see our garage door repair Pembroke Pines Pros page.
What Affects Garage Door Pricing in Broadview Park
- Door age and brand. Broadview Park has a lot of mid-century and 1970s-80s housing stock alongside newer builds, and the doors on those homes span several generations of hardware. A Craftsman opener from twenty years ago and a current LiftMaster unit fail in completely different ways, and part availability drives the quote. Brand-matched expertise means we’re not hunting for a workaround on a Raynor or Amarr door.
- Heat and humidity. South Florida’s warmth and moisture are hard on steel components and on the lubrication inside opener gears. Springs fatigue faster when a door cycles many times a day in this climate, and rollers and hinges dry out and start to bind. Regular lubrication stretches the life of all of it.
- How the door is used. In Broadview Park many people come and go through the garage rather than the front door, so the door cycles far more than the national average. More cycles means faster wear on springs, cables, and opener gears – one of the reasons spring failures are so common here.
- Matched pair vs. single spring. If one torsion spring breaks on a two-spring door, the second is almost always at the same point in its life. Replacing both together costs about twice the one-spring range, but it avoids a second service call weeks later.
- Whether it’s a repair or a replacement. A door that’s been hit by a car, rusted through at the bottom section, or is simply at the end of its life may cost more to keep patching than to replace. New door installation runs $700 – $2,200, which sometimes makes more sense than repeated repairs.
- Access and door size. A standard single-car door is quicker to work on than a wide double door, and a door with limited clearance in the garage affects how we set up. Both factor into labor.
Spring Repair: Why It Costs What It Costs in Broadview Park
Torsion and extension springs are under heavy tension, and a broken spring is one of the highest-risk jobs in this trade. This is not a DIY repair – a spring that lets go under load can cause serious injury, which is why we handle it with professional-grade winding bars and proper training rather than treating it like a hardware swap. That’s also why spring repair isn’t something to hand to a general handyman.
The typical range for one spring is $180 – $340. What’s included: the correct spring sized to your door’s weight, proper tensioning so the door balances and the opener isn’t straining, and a safety check on the cables, drums, and bottom brackets while we’re in there. If your door has two springs and one has broken, we’ll tell you honestly whether the second is close to failing, and quote the pair separately so you can decide.
Never try to open a door with a broken spring by force, and never operate it with the opener – the opener isn’t designed to lift the full weight of the door without spring assist, and it can damage the opener or bring the door down. Call us instead. Spring failures are exactly the kind of urgent situation our emergency garage door service exists for.
Opener Repair and Installation Costs
Opener problems are the second most common call we get in Broadview Park. A door that won’t respond, reverses halfway up, or only works from the wall button usually points to the opener rather than the door itself. Repairs run an estimated $120 – $320, and a full new opener installation runs $250 – $550.
What drives the difference:
- Repair vs. replace. A failed capacitor, a stripped gear, or a misaligned safety sensor is a repair. An opener that’s twenty years old with a failed logic board and no available parts is usually a replacement.
- Brand and compatibility. We work on LiftMaster, Chamberlain, Genie, and Craftsman openers regularly, and we know which parts are still available and which aren’t. That brand knowledge means correct programming and correct tension settings on the first visit.
- Belt, chain, or screw drive. Belt-drive openers are quieter and cost a bit more to install; chain drive is the workhorse. Either way, the new opener has to be matched to your door’s weight and balance.
- Smart features. If you want Wi-Fi or app control, that’s built into the opener itself, so it factors into the installation quote rather than being an add-on later.
If the opener is failing and the door is also showing wear, it’s worth having both looked at in one visit – we do repair and full installation, so you’re not calling a second company when a small repair reveals a bigger issue.
New Garage Door Installation: What $700 – $2,200 Buys in Broadview Park
A full new door installation in Broadview Park typically runs $700 – $2,200. That covers removal of the old door, the new door and its hardware, and proper balancing. The low end is a basic uninsulated steel single door; the high end is a larger, insulated, or carriage-style door with more hardware.
What to think about before you choose:
- Insulation. An insulated door helps with heat and noise, which matters in a Broadview Park garage that doubles as a laundry room or workspace. It’s not a comfort upgrade you’ll regret in this climate.
- Material. Steel is the standard. If you want the look of wood without the upkeep, a composite or stamped steel carriage door gives you that.
- Window and panel options. Windows add light but also add cost and a cleaning chore. Panels with a raised or recessed pattern can match the look of the house.
- Opener compatibility. A new insulated door weighs more than an old uninsulated one. If your opener is at the end of its life, replacing it at the same time usually costs less than doing it separately.
We install doors from Clopay, Amarr, Wayne Dalton, and Raynor, so we can source a door that fits your opening and matches the look of your home. We’ll measure the opening and quote the whole job in writing.
How to Save on Garage Door Costs in Broadview Park
The best way to save is to catch problems early. A small fix today beats a big repair later.
- Lubricate the moving parts. A garage-door-specific lubricant on the rollers, hinges, and spring (not the track) once or twice a year keeps everything moving freely and slows wear.
- Listen for changes. A squeak, a grind, or a door that’s suddenly slower is a warning. Have it checked before it becomes a snapped cable or a failed opener.
- Get the springs replaced together. If one spring breaks, replacing both at once is cheaper than two separate service calls – and it means one visit instead of two.
- Balance the door. If the door feels heavy or won’t stay halfway up, the springs or the balance is off. A quick adjustment can prevent opener strain.
- Ask for a written estimate before work starts. Our estimates are free, so there’s no reason to guess at cost. Call (844) 443-4021 and we’ll give you a clear number.
Don’t use a discount coupon or a “free door” offer as your yardstick – what matters is whether the quote covers the full job and whether the technician knows your brand. A cheap fix on the wrong part costs more in the long run.
Why Broadview Park Homeowners Call a Specialist Instead of a Handyman
Garage doors are a system: springs, cables, tracks, rollers, panels, and the opener all have to work together. A general handyman may know how to hang a door, but a torsion spring under tension is a different job entirely, and an opener that’s programmed wrong or tensioned wrong will fail again. We work only on garage doors – repair, opener repair, spring repair, installation, and emergency response – so the technician who shows up has done your job before.
Our technicians have up to 13 years of experience, and they’re trained across eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means correct parts, correct tension settings, and correct programming – not workarounds. When a repair reveals something bigger, we can handle it in the same visit because we do full installation too.
FAQs – Garage Door Cost in Broadview Park
How much does garage door repair cost in Broadview Park?
Most garage door repairs in Broadview Park cost an estimated $150 – $600. That range covers hinges, bearings, track, rollers, and general hardware fixes. The exact price depends on what’s failed and what parts are needed. Call (844) 443-4021 for a free estimate – we’ll tell you the number before we start.
How much does a broken garage door spring cost to fix in Broadview Park?
One spring costs an estimated $180 – $340. If your door has two springs and both are being replaced, expect about twice that range. Because springs wear as a pair, replacing both at once is usually the smarter move. Call (844) 443-4021 for a quote.
Is it cheaper to repair or replace a garage door in Broadview Park?
Repair is cheaper when the structure and panels are sound – a $150 – $600 repair beats a $700 – $2,200 installation in that case. Replacement makes more sense when a door is rusted through, repeatedly failing, or has been damaged beyond a single panel. We’ll give you both numbers if a repair starts to look like a patch on a failing door. Call (844) 443-4021 and we’ll walk through it.
How much does a new garage door opener cost in Broadview Park?
Opener repair runs an estimated $120 – $320, and new opener installation runs $250 – $550. If your opener is old and the part is no longer made, replacement is usually the better value. Call (844) 443-4021 for a free estimate on your specific opener.
Can you come out today if my garage door is stuck?
We offer same-day service on most urgent calls and emergency garage door response for a door that’s stuck open, off its track, or won’t close. A broken spring or a door hanging off the track is a security and safety issue, so call (844) 443-4021 and we’ll get you booked as fast as we can.
Do you work on my brand of garage door or opener?
We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If you’re not sure what brand you have, tell us the model or take a photo and we’ll identify it. Call (844) 443-4021 for a free estimate.
Get a Free Garage Door Estimate in Broadview Park
Whether it’s a $130 cable repair or a full new door installation, the number that matters is the one in writing. Our estimates are free, and we’ll tell you what’s actually wrong before we quote it. Call (844) 443-4021 to book a free estimate in Broadview Park. Same-day and emergency service is available for urgent failures, and we’ll get a technician out to you as quickly as we can.
Written by the team at Garage Door Repair Pembroke Pines Pros.
Pricing reflects the Broadview Park market as of 2026. Garage Door Repair Pembroke Pines Pros offers free estimates – call (844) 443-4021.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Kevin Fletcher"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Imani Ingram"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Vikram Rao